Can anyone help? Rise of the Triad install problems
Can anyone help? Rise of the Triad install problems
I am running a Compaq Deskpro 575, which i recently bought to play old dos games on.
The problem is I cannot install Rise of the Triad off of the installer CD. I am running Windows 95, and get some error messages which stop the installation process.
The error message says: "You cannot run this graphics application windowed. The application will be suspended untill you switch it to full screen by pressing ALT+ENTER. Check the Properties to ensure they are correct."
(If there is a way i can post images of the problem to show you, i can show you three images: one of the installation process another of the error message and another of the screwed up screen before the error message. I need to know how to do this! I'm not sure..)
I think the problem is to do with the graphics. The graphics adatper is the Compaq Qvision PCI. I read the help files from the game CD which said that Compaq machines would need a special driver called FINDVGA.sys which is part of a SoftPaq called SPO117.ZIP. I download this today from the Compay FTP site. I installed it by putting a line of code in my Config.sys. When i restart the computer it should acknowledge the change and use my monitor. But, it says that there is no VGA installed!!!!.
I have been to Compaqs website to get the updates for my machine, but i still get the messages.
Another thing i tried was copying the contents off the CD onto my HDD (Hard Disk Drive). But when i run the install program it says: W_InitFiles: No Files Found!
I have tried running the installation process in DOS which dosen't work.
Oh, and one final thing the Compaq Deskpro 575 is a Pentium running at 75 MHZ (a very early pentium), with 49MB of ram, a 4.3 GB HDD (to install my entire DOS game collection: Wolf3d, Doom 1, Doom2, Final Doom, Spear of Destiny, Spear of the Destiny: The Lost Episodes and Operation Body Count.) And of course it uses the Compaq QVison PCI graphics adapter and I am using a Goldstar StudioWorks 56i SVGA monitor.
Any idea whats the problem?
John.
The problem is I cannot install Rise of the Triad off of the installer CD. I am running Windows 95, and get some error messages which stop the installation process.
The error message says: "You cannot run this graphics application windowed. The application will be suspended untill you switch it to full screen by pressing ALT+ENTER. Check the Properties to ensure they are correct."
(If there is a way i can post images of the problem to show you, i can show you three images: one of the installation process another of the error message and another of the screwed up screen before the error message. I need to know how to do this! I'm not sure..)
I think the problem is to do with the graphics. The graphics adatper is the Compaq Qvision PCI. I read the help files from the game CD which said that Compaq machines would need a special driver called FINDVGA.sys which is part of a SoftPaq called SPO117.ZIP. I download this today from the Compay FTP site. I installed it by putting a line of code in my Config.sys. When i restart the computer it should acknowledge the change and use my monitor. But, it says that there is no VGA installed!!!!.
I have been to Compaqs website to get the updates for my machine, but i still get the messages.
Another thing i tried was copying the contents off the CD onto my HDD (Hard Disk Drive). But when i run the install program it says: W_InitFiles: No Files Found!
I have tried running the installation process in DOS which dosen't work.
Oh, and one final thing the Compaq Deskpro 575 is a Pentium running at 75 MHZ (a very early pentium), with 49MB of ram, a 4.3 GB HDD (to install my entire DOS game collection: Wolf3d, Doom 1, Doom2, Final Doom, Spear of Destiny, Spear of the Destiny: The Lost Episodes and Operation Body Count.) And of course it uses the Compaq QVison PCI graphics adapter and I am using a Goldstar StudioWorks 56i SVGA monitor.
Any idea whats the problem?
John.
Take a look there, plenty patches and fixes for shareware/ full :
http://www.3drealms.com/downloads.html
[EDIT]
Also there is a ROTT windows port, works pretty well on my W98SE boot but i've never tried it on W95:
http://home14.inet.tele.dk/Bna-Info/index.htm
http://www.3drealms.com/downloads.html
[EDIT]
Also there is a ROTT windows port, works pretty well on my W98SE boot but i've never tried it on W95:
http://home14.inet.tele.dk/Bna-Info/index.htm
- GameMaster.EXE
- Way too much free time
- Posts: 694
- Joined: Wed Jun 29, 2005 2:36 pm
- Location: North Texas, USA
Re: Can anyone help? Rise of the Triad install problems
Try running it from pure DOS. To do this, restart your computer and when it says "Starting Windows 95" press F8 and select "Command Prompt Only" and the familiar prompt shall appear:johngUK wrote:
The problem is I cannot install Rise of the Triad off of the installer CD. I am running Windows 95, and get some error messages which stop the installation process.
The error message says: "You cannot run this graphics application windowed. The application will be suspended untill you switch it to full screen by pressing ALT+ENTER. Check the Properties to ensure they are correct."
C:\>
From there type the neccesary commands to the start the program and it should work.
- GameMaster.EXE
- Way too much free time
- Posts: 694
- Joined: Wed Jun 29, 2005 2:36 pm
- Location: North Texas, USA
- GameMaster.EXE
- Way too much free time
- Posts: 694
- Joined: Wed Jun 29, 2005 2:36 pm
- Location: North Texas, USA
Re: Can anyone help? Rise of the Triad install problems
johngUK wrote:I am running a Compaq Deskpro 575, which i recently bought to play old dos games on.
The problem is I cannot install Rise of the Triad off of the installer CD. I am running Windows 95, and get some error messages which stop the installation process.
The error message says: "You cannot run this graphics application windowed. The application will be suspended untill you switch it to full screen by pressing ALT+ENTER. Check the Properties to ensure they are correct."
(If there is a way i can post images of the problem to show you, i can show you three images: one of the installation process another of the error message and another of the screwed up screen before the error message. I need to know how to do this! I'm not sure..)
I think the problem is to do with the graphics. The graphics adatper is the Compaq Qvision PCI. I read the help files from the game CD which said that Compaq machines would need a special driver called FINDVGA.sys which is part of a SoftPaq called SPO117.ZIP. I download this today from the Compay FTP site. I installed it by putting a line of code in my Config.sys. When i restart the computer it should acknowledge the change and use my monitor. But, it says that there is no VGA installed!!!!.
I have been to Compaqs website to get the updates for my machine, but i still get the messages.
Another thing i tried was copying the contents off the CD onto my HDD (Hard Disk Drive). But when i run the install program it says: W_InitFiles: No Files Found!
I have tried running the installation process in DOS which dosen't work.
Oh, and one final thing the Compaq Deskpro 575 is a Pentium running at 75 MHZ (a very early pentium), with 49MB of ram, a 4.3 GB HDD (to install my entire DOS game collection: Wolf3d, Doom 1, Doom2, Final Doom, Spear of Destiny, Spear of the Destiny: The Lost Episodes and Operation Body Count.) And of course it uses the Compaq QVison PCI graphics adapter and I am using a Goldstar StudioWorks 56i SVGA monitor.
Any idea whats the problem?
John.